01Why the per-square-metre rule fails
A rule of thumb assumes every room of the same floor area behaves the same way. It cannot tell the difference between a shaded south-facing bedroom and a west-facing living room with six square metres of single glazing that takes the afternoon sun. In Hout Bay those two rooms can need very different capacities.
02What a heat load accounts for
- Floor area and ceiling height
- Window and door area, glazing type and whether there is shading
- Orientation and the time of day the room is used
- Roof construction and insulation, and whether there is a hot roof above
- Occupancy, and the appliances that run in the room
- Air leakage and whether the room opens onto a hot or humid space
- The latent load, which on this coast is significant
03What oversizing costs you
An oversized unit reaches setpoint fast and shuts down. It cools the air but does not run long enough to pull moisture out, so the room feels cold and clammy. It also starts and stops more often, which is harder on the compressor and noticeably louder, and it usually costs more to buy in the first place.
04What undersizing costs you
An undersized unit runs continuously, never quite holds temperature on a hot day, and wears out faster. It is also the more common mistake when a quote is built on a per-square-metre guess and the room has a lot of glass.
05What to give an installer for a useful quote
With those answers a heat-load calculation is straightforward. Without them, any capacity figure is a guess dressed up as advice.
- Room dimensions and ceiling height
- Which direction the main windows face
- How much of the wall is glass, and whether there is shade or blinds
- What the room is used for and how many people are usually in it
- Whether you want heating as well as cooling
- Where the outdoor unit could physically go, and how far that is from the indoor unit
06Multi-room and ducted systems
For several rooms, a multi-split or ducted system can be neater and quieter than a wall unit in each room, but the sizing is less forgiving: if the combined indoor capacity is mismatched to the outdoor unit, some rooms lose performance. Zoning and how often rooms are used together should drive the design.