[ GUIDE · HOUT BAY ]

Salt-air corrosion: why Hout Bay equipment fails early, and what slows it

What salt mist actually does to coils, casings and terminals, where outdoor units should go on a coastal property, and the routine that buys years of service.

Updated November 2026

01What salt mist does to cooling equipment

Salt is hygroscopic: it draws moisture out of the air and holds it against the metal. On a condenser coil that film of damp salt keeps the aluminium fins wet long after the mist has passed, and wet aluminium with salt and oxygen on it corrodes quickly. The fins are thin, so the damage moves faster than most people expect.

The second effect is galvanic. Where aluminium fins meet copper tubes, or a stainless screw meets a mild-steel bracket, the damp salt film becomes an electrolyte and the less noble metal gives way. That is why coastal equipment often fails at the joints and fasteners first, while the middle of the coil still looks acceptable.

02Where it shows up first on a Hout Bay property

Wind direction matters. Properties exposed to the prevailing south-easter and the onshore swell collect more airborne salt than a sheltered courtyard, and equipment on a sea-facing roof or wall sees the worst of it.

  • Outdoor coil fins, especially the bottom rows nearest splash and ground moisture
  • Casing seams, screw heads and mounting brackets
  • Fan bearings and motor shafts that seize or rumble
  • Electrical terminals, contactors and PCB edge connectors
  • Drain pans and drain lines that corrode through
  • Roof-mounted condensing units with no shade and no service access

03Placement decisions that matter more than the brand

A well-placed mid-range unit outlasts a premium unit bolted into a salt trap. The aim is airflow, height and distance from direct spray: enough clearance around the coil to reject heat, mounted above splash and ground-level leaf litter, and away from irrigation, pool splash and the direct line of onshore wind where that is possible.

Indoor units and pipework deserve the same thought. Insulation that is split or UV-degraded lets moisture in, and a drain that runs uphill or has a shallow fall will grow biofilm and start dripping inside the room within a season.

04What actually helps

Rinsing alone is not a maintenance plan. Salt that has bonded to the fins needs a proper coil cleaner and a careful rinse, and rinsing a coil that is already shedding fins can make things worse. If the coil is crumbling, cleaning is not the answer.

  • Coated or corrosion-resistant coils where the unit sits in the spray zone
  • Stainless or properly galvanised brackets and fasteners, not mild steel
  • Fresh-water rinsing of coils at a sensible interval, followed by a proper clean
  • Scheduled coil cleaning rather than waiting for a performance drop
  • Prompt treatment of the first rust spots, before they become a hole
  • Keeping drains, gutters and the area around the outdoor unit clear

05A realistic servicing interval for the coast

As a working rule: once a year for equipment a few streets back from the water, every six months for anything within sight and smell of the sea, and quarterly for busy commercial equipment near the harbour or on an exposed roof. Commercial kitchens need the shorter interval for grease as much as salt.

06When cleaning is no longer enough

Fin rot, pinhole leaks in the coil, corroded headers and rusted-through casings are replacement signals, not maintenance items. A coil that has lost a meaningful share of its fins cannot reject heat no matter how clean it is, and repeated gas top-ups on a corroded circuit are money spent on a losing argument.

[ NEXT STEP ]

Tell us what the equipment is doing.

Send the details and we will come back with next steps, a site visit or a written quote. If stock is at risk, WhatsApp is faster.