[ GUIDE · HOUT BAY ]

Cold room temperatures, defrost and airflow: a practical guide

Target temperatures by product type, how defrost systems work, and the loading and airflow rules that keep a room holding temperature.

Updated November 2026

01Temperature targets depend on the product, not the room

Chilled storage, freezer storage and blast chilling are different duties. Chilled rooms generally sit between about 0°C and 5°C depending on the product; freezer rooms typically run around −18°C or colder; blast chillers and blast freezers are designed to pull product down quickly and are not storage rooms. Confirm the target with whoever owns the food-safety plan before a room is specified.

02Air temperature is not product temperature

A room can read −18°C on the wall thermometer while the centre of a pallet is much warmer. Air moves, product does not. That is why loading warm stock, overfilling a room or blocking the evaporator produces a room that looks fine and stock that is not.

03Why ice forms, and how defrost handles it

Every time the door opens, humid Hout Bay air enters and condenses on the evaporator. Below freezing that becomes frost, and frost insulates the coil and restricts airflow. Defrost systems clear it: off-cycle defrost for chilled rooms, electric or hot-gas defrost for freezer rooms, controlled by a timer, a sensor or a demand system.

A room that ices heavily usually has a defrost fault, a door left open or a worn door seal letting moist air in continuously. Cleaning the ice without finding the cause just resets the clock.

04Drains and door heaters

Melted defrost water has to leave the room. A blocked or frozen drain fills the floor, damages stock packaging and, in a freezer, freezes the door shut. Door frame heaters keep the seal from freezing to the frame; when one fails, staff start forcing the door, which then damages the seal and makes the icing worse.

05Loading and airflow rules that matter more than setpoint

  • Never stack product against or under the evaporator; it needs clear air
  • Leave space between pallets and the walls for air to circulate
  • Do not put warm stock straight into a storage room if you can pre-chill it
  • Keep the door closed; strip curtains help in high-traffic rooms
  • Rotate stock so the room is not packed to the ceiling on delivery day
  • Record temperatures at a sensible interval so a drift is visible

06Monitoring and records

A temperature alarm only helps if somebody hears it. Where stock value justifies it, remote monitoring that sends an alert to a phone is worth more than another thermometer on the wall. Whatever the setup, a simple written or digital log of morning and evening readings gives you evidence when something goes wrong.

[ NEXT STEP ]

Tell us what the equipment is doing.

Send the details and we will come back with next steps, a site visit or a written quote. If stock is at risk, WhatsApp is faster.